Cowl Moulding / Trim: Service and Repair

Cowl, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing the plenum chamber





Remove:
- the windscreen wipers. See Wiper arm / blade windshield, replacing Wiper Arm/Blade, Windshield, Replacing
- the 6 clips.
Press in the center of the rivet head. Remove the four front clips.




Remove both the outer clips.
Lift out the cowl.

Installing the plenum chamber
Install in the reverse order.

Note! Check that the guide clips underneath the cowl are in the correct position in relation to the windscreen.