Replacing Handset

Handset, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work




Ignition off.




Remove the storage compartment. Release the catches using the handle at the lower edge and pull backwards as illustrated.




Remove the carpet as illustrated.

Removing the handset




Disconnect the connector (1).
Disconnect the carphone cable from the load-removing grommet (2).
Release the carphone cable.
Remove the handset.

Removing the carphone handset wall
Remove screw (3).
Push the catch (4) to one side.
Remove the wall.

Installing the carphone handset wall
Install the wall.
Install screw (3).

Installing the handset




Route the carphone cable.
Install the carphone cable in the load-removing grommet (2).
Connect the connector (1).

Finishing work
Install the carpet.
Install the storage locker.
Test the function.