Alternator: Service and Repair

Operation number: 32102-2

Generator

Removal

Battery, disconnection Battery Disconnecting and Connecting





Remove intake manifold Refer to: Induction pipe, B6324S5, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC AWD, B6324S4, TF-80SC Service and Repair





Installation





Note! Only tighten the bolt finger tight at this stage.





Caution! Make sure that the component is correctly located on the locating dowels.




1. Torque: Generator B+ terminal, 15 Nm

2. Torque: M8, 24 Nm