Front Safety Belt Retractor

Operation number: 88408-2

Front safety belt retractor

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting. Battery Disconnecting and Connecting





Warning! Take extra care when handling supplemental restraint system (SRS) components.

Follow instruction for handling of non-deployed pyrotechnical part Refer to: Handling non-deployed pyrotechnical part Handling Non-Deployed Pyrotechnical Part

Remove the B-pillar trim panel Refer to: B-pillar trim panel B-Pillar Trim Panel




Torque: M8, 24 Nm




Torque: M6, 10 Nm

Perform connector ignition cable Refer to: Igniter wire connector Igniter Wire Connector








Torque: M6, 10 Nm




Torque: Safety belt retractor front to body, 40 Nm

Installation

To install, reverse the removal procedure.

Perform seatbelt function, check Refer to: Seat belt function, check Testing and Inspection

Perform supplemental restraint system (SRS), post check Refer to: Supplementary restraint system (SRS), inspection Testing and Inspection