Igniter Wire Connector

Igniter wire connector

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Replacing components

Connector ignition cable disassembling




When disassembling the connector it is extremely important that the catch on the connector is released first. The connector must be pulled straight off in relation to the mounting to prevent damage.

Caution! Do not use a tool of any type when disassembling due to the increased risk of damage to the connector.




The connector is securely fastened due to the accurate shape so that the connection is durable.

Warning! Any damage to the connector can result in the SRS system being disabled.