Air Register: Service and Repair

Driver side register

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Information

Method content

This method consists of:
- Center ventilation vent, replacing
- Outer ventilation vents, replacing.

Center ventilation vent, replacing

Removing the center ventilation vent





Remove:
- the ventilation grilles. Pry off the grilles from inside
- the vent housing by prying up the hooks. See the illustration
- the connector for the switch.

Transferring components
Transfer the switch for the hazard warning signal flashers to the new ventilation vent housing.

Installing the center ventilation vent

Install:
- the connector
- the vent housing. Ensure that the hooks engage properly.
First locate the ventilation grilles in the outer mountings. Then press the grilles into place.

Outer ventilation vents, replacing

Removing outer ventilation vents





Remove:
- the ventilation grilles. Pry off the grilles from outside
- the vent housing by prying up the hooks. See the illustration.

Installing outer ventilation vents
Install the vent housing. Ensure that the hooks engage properly.
First locate the ventilation grilles in the inner mountings. Then press the grilles into place.