Radiator: Service and Repair

Radiator

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Removing the engine cooling fan (FC)
Remove the electric cooling fan. See Engine cooling fan (FC), B5254T7, AW55-50/51SN, B5254T7, M66 Service and Repair

Installing the bracket for the radiator





Install:
- the bracket
- the 4 x screws, lightly.
Remove the charge air cooler (CAC), see: Charge air cooler, B5254T7 Service and Repair

Removing the engine compartment panel





Remove:
- screws
- the engine compartment panel.

Removing the upper radiator mounting





Remove the following on both sides:
- the screw
- the radiator mounting.

Suspending the condenser




Slightly raise the condenser and suspend from a suitable place, so that the condenser is not put under any strain.

Removing the radiator





Remove:
- the screws for the upper radiator mounting, 2 on both sides.
- the bracket under the air conditioning aggregate
- the radiator downwards.

Installation

Note! For tightening torques, see Tightening torque, B5254T7, AW55-50/51SN, B5254T7, M66 Tightening Torque

Installing the radiator





Install:
- Radiator
- the bracket
- the 4 x screws, lightly.




- the screws for the upper radiator mounting, 2 on both sides.




- the engine compartment panel
- the screws, M6.
Install the charge air cooler (CAC). See: Charge air cooler, B5254T7 Service and Repair

Installing engine coolant fan (FC)




Install a mobile jack under the radiator.




Remove the bracket.
Install the electric cooling fan. See: Engine cooling fan (FC), B5254T7, AW55-50/51SN, B5254T7, M66 Service and Repair