Removal and Replacement

Operation number: 89106-2

Spoiler rear

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal







Loosen the panel at the upper edge.





Note! Be prepared to collect escaping fluids.



















Use: Masking tape, 9511051

Installation






Use: Isopropanol, 1161721






Use: Masking tape, 9511051






Use: Low temperature grease, 1161761






Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.

Note! Note the position of the component before removal.

Use: Masking tape, 9511051






Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.






Note! Make sure that the mating faces are clean and free of foreign material.

Use: Isopropanol, 1161721

Note! This step requires the aid of another technician.






Note! Make sure that the mating faces are clean and free of foreign material.

Use: Isopropanol, 1161721

Note! This step requires the aid of another technician.






Use: Glue, 8714874

Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.











Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.






Note! This step requires the aid of another technician.















Note! Be prepared to collect escaping fluids.







Install the panel.









Note! Make sure that the customer is advised not to wash the vehicle within the next 72 hours.