Sun Shade: Service and Repair

Sun visor/inner cover sun roof

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the sun visor / inner cover sun roof




Remove the lens. See: Glass sun roof Service and Repair.
Pull the sun visor / inner cover forwards.

Remove:
- the 2 screws at the front mounting
- the 2 front slides.
Pull the sun visor / inner cover further forwards.

Remove:
- the 2 screws at the rear mounting
- the 2 rear slides.

Installation

Installing the sun visor / inner cover sun roof

Install:
- the 2 rear slides
- the 2 screws at the rear mounting. Tighten.
Slide in the sun visor / inner cover half way.

Install:
- the 2 front slides
- the 2 screws at the front mounting. Tighten.
Check the operation of the sun visor / inner cover.
Install the lens. See: Glass sun roof Service and Repair.

Finishing

Adjusting the lens and installing components
Adjust the lens. See: Sun roof Adjustments.
Install the apron molding. See: Apron molding sunroof Service and Repair.