Connecting the Breakout Box, Driver Door Module / Passenger Door Module (DDM/PDM)

Connecting the breakout box, driver door module / passenger door module (DDM/PDM)

Special tools:
951 2900 DDM/PDM adapter 951 2900 DDM/PDM Adapter
951 1428 Breakout box 951 1428 Breakout Box
951 1499 Cable 951 1499 Cable
981 3190 Replaced by 9511428 981 3190 Replaced By 9511428

Connecting the breakout box




- Ignition off
- Remove the fuse.
- Remove the door panel
- Unplug the control module connector.
Plug adapter 951 2900 DDM/PDM adapter 951 2900 DDM/PDM Adapter into the control module connector and connect breakout box 951 1428 Breakout box 951 1428 Breakout Box alternatively, and wiring 951 1499 Cable 951 1499 Cable to the adapter.
Alternatively, breakout box 981 3190 Replaced by 9511428 981 3190 Replaced By 9511428 could be connected to the adapter.
Disconnect the breakout box in reverse order.

Other information:
- Panel front door Removal and Replacement
- Signal specification Signal Specification, Driver's Door Module / Passenger Door Module (DDM/PDM)
- For information on fuses, see the relevant wiring diagram.