Engine, Installing

Engine, installing

Operation number: 21014-0

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Installation

Raise the vehicle so that the engine / transmission unit are free beneath the vehicle. Place the engine and transmission on the lifting table. Lower the lifting table to its lowest position.
Lower the vehicle over the engine/transmission unit, being sure to fit the unit between the frame members. Stop lowering the vehicle just before the engine/transmission unit is in position. Raise the engine/transmission unit.

Install the following items:
- right-hand engine mounting. Refer to: Engine support insulator, right, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Engine Support Insulator, Right
- left-hand engine mounting. Refer to: Engine support insulator left, B6304T4, B6324S5, B6324S4 Engine Support Insulator Left

Torque: M8, 24 Nm

Torque: M6, 10 Nm

Install the following items:
- right drive shaft. Refer to: Drive shaft right, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Driveshaft Right Drive shaft right Driveshaft Right
- left driveshaft. Refer to: Driveshaft left, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Driveshaft Left
- the subframe. Refer to: Front subframe, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Service and Repair
- the exhaust manifold. Refer to: Exhaust manifold, B6324S5 Service and Repair Exhaust manifold, B6324S4 Service and Repair
- the bevel gear. Refer to: Bevel gear, B6304T4, TF-80SC AWD, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD Bevel Gear Bevel gear Bevel Gear
- the auxiliaries belt Refer to: Accessory Drive Belt, B6324S5, B6324S4 Service and Repair Accessory Drive Belt Service and Repair
- Engine control module (ECM). Refer to: Engine control module (ECM), B6304T4, B6324S5, B6324S4 Service and Repair

Engine, installing

Operation number: 21014-0

Installation

See information about lifting points body Refer to: Jacking points body Locations

Caution! Take extra care when handling the components.

Use: Unit lift.

Install the following items:
- Engine support insulator, right Refer to: Engine support insulator, right, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Engine Support Insulator, Right
- Engine support insulator left Refer to: Engine support insulator left, B6304T4, B6324S5, B6324S4 Engine Support Insulator Left

Torque: M8, 24 Nm

1. Torque: M6, 10 Nm

2. Torque: M8, 24 Nm

Torque: M6, 10 Nm

Install the following items:
- Drive shaft right Refer to: Drive shaft right Driveshaft Right Drive shaft right, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Driveshaft Right
- Driveshaft left Refer to: Driveshaft left, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Driveshaft Left
- Front subframe Refer to: Front subframe, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC Service and Repair
- exhaust manifold Refer to: Exhaust manifold, B6324S5 Service and Repair Exhaust manifold, B6324S4 Service and Repair
- the auxiliaries belt Refer to: Accessory Drive Belt Service and Repair Accessory Drive Belt, B6324S5, B6324S4 Service and Repair
- Engine control module (ECM) Refer to: Engine control module (ECM), B6304T4, B6324S5, B6324S4 Service and Repair