Front Safety Belt Retractor

Front safety belt retractor

Operation number: 88408-2

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting Refer to: Battery disconnecting and connecting Battery Disconnecting and Connecting





Warning! Take extra care when handling supplemental restraint system (SRS) components.

Follow instruction for handling of non-deployed pyrotechnical part Refer to: Handling non-deployed pyrotechnical part Handling Non-Deployed Pyrotechnical Part

Remove the B-pillar trim panel Refer to: B-pillar trim panel B-Pillar Trim Panel




Torque: M8, 24 Nm




Torque: M6, 10 Nm

Perform connector ignition cable Refer to: Igniter wire connector Igniter Wire Connector








Torque: M6, 10 Nm




Torque: Safety belt retractor front to body, 40 Nm

Installation

To install, reverse the removal procedure.

Perform seatbelt function, check Refer to: Seat belt function, check Testing and Inspection

Perform supplemental restraint system (SRS), post check Refer to: Supplementary restraint system (SRS), inspection Testing and Inspection