Sun Visor, Replacing

Sun visor

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the sun visor





Remove:
- the A-post panel as described in A-pillar trim panel A-Pillar Trim Panel
- the connector and the tie strap.
Fold out the sun visor.
Remove the sun visor cover.
Insert a large screwdriver to release the expander clips of the sun visor. See illustration.
Undo the panel at the upper windshield member slightly at the corner.

Hint: The panel is attached with clips.

Thread the connector through the panel.

To replace the sun visor inner retainer:
Fold down the cover and insert a small screwdriver to release the catches in the retainer.

Installation

Installing the sun visor
Install the components in reverse order.