Engine Accessory Bracket: Service and Repair

Accessory Drive Component Bracket

Operation number: 21585-3











Removal

Drain cooling system, draining, filling, and bleeding Refer to: Cooling system - draining, charging and bleeding, B6304T4, B6324S5, B6324S4 Service and Repair

Remove the auxiliaries belt Refer to: Accessory Drive Belt, B6304T4 Service and Repair Accessory Drive Belt Service and Repair









Caution! The alignment procedure must be carried out in full even if only one part of the accessory drive component bracket has been removed.

Installation








1. Caution! Make sure that no components catch.

2.
Note! Only tighten the bolt finger tight at this stage.





Note! Only tighten the bolt finger tight at this stage.





Caution! Take extra care when handling the component.

Caution! Only rotate the pulley counterclockwise.

999 7262 Position sensor 999 7262 Position Sensor
1.
Note! Only use moderate force.

2.
Note! Only use moderate force.

3. Torque: M10, 50 Nm




Torque: Accessory Drive Component, adjusting screw, 1 Nm
Torque: Accessory Drive Component, adjusting screw, 4 Nm

Use: Allen key.




Torque: M10, 50 Nm




1. Torque: M8, 24 Nm

2. Torque: M10, 50 Nm




Torque: Accessory Drive Component, adjusting screw, 4 Nm
Torque: Accessory Drive Component, adjusting screw, 1 Nm

Use: Allen key.




Torque: M8, 24 Nm









Install the auxiliaries belt Refer to: Accessory Drive Belt, B6304T4 Service and Repair Accessory Drive Belt Service and Repair

Fill cooling system, draining, filling, and bleeding Refer to: Cooling system - draining, charging and bleeding, B6304T4, B6324S5, B6324S4 Service and Repair