Parameter Description

Parameter description

Parameters, status

Reverse gear, status
Indicates whether reverse gear is engaged.
Not = Reverse gear is not engaged.
Engaged = Reverse gear is engaged.

PAC settings, reference lines, status
Indicates whether reference lines are drawn.
With = Reference lines are drawn.
Without = Reference lines are not drawn.

PAC settings, activation, status
Indicates what triggers activation of the parking assistance camera module (PAC).
Automatic = The screen comes up and an image is displayed when reverse gear is engaged.
Always active = The screen is always up when the vehicle is running. An image only appears when reverse is engaged.
Off = The system is off and the screen is not actuated when reverse is engaged.

PAC distance bars, status
Indicates whether the bars to indicate distance to an object in the rear are to be displayed.
Off = Distance bars not displayed.
On = Distance bars are displayed.

Request of image display from PAC
False = The parking assistance camera module (PAC) has not requested image display on the screen.
True = The parking assistance camera module (PAC) has requested image display on the screen.

Manual screen raising/lowering
Down = Screen is lowered.
Up = Screen is raised.

Gear
Indicates currently selected gear (only automatic transmission).

Parameters, value

Power supply, control module, value
Measurement range 6 - 20 V.
Indicates the power supply to the parking assistance camera module (PAC).
The normal value when the alternator is charging: 13.0-14.5 V.

Speed signal from BCM, value
Measurement range 0.6 - 300 km/h
The value shows the vehicle's speed in km/h. Calculated value based on all wheel sensors' values.