Headlamp Washer Spray Nozzle: Service and Repair

Headlight washers

Operation number: 36323-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Hint: For replacing washer motor and level sensor, see: B5244Sx / B5254Tx Washer fluid reservoir, B5254T7 Service and Repair Washer fluid reservoir Service and Repair or Other Washer fluid reservoir Service and Repair Washer fluid reservoir, B5254T7 Service and Repair.

Preparatory work

Removing the headlamp and bumper cover

Remove:
- the headlamp. See: Headlamp bulb Headlamp Bulb
- the bumper cover. See: Cover bumper front Service and Repair Cover bumper front, B5254T7 .

Removal

Removing high-pressure washer headlamp





Remove:
- the 2 screws
- the high-pressure washer
- the clips on the hose connector
- the hose.

Installation

Installing the high-pressure washer headlamp

Install:
- the clips on the hose connector
- the hose
- the high-pressure washer
- the 2 screws.

Finishing

Installing headlamp and bumper cover

Install:
- the bumper cover. See: Cover bumper front Service and Repair Cover bumper front, B5254T7 .
- the headlamp. See: Headlamp bulb Headlamp Bulb

Adjusting nozzle




Test the function.
Adjust the alignment of the nozzle as necessary as illustrated. The cover must be against the bumper cover without any play.