Driveshaft Left

Driveshaft left

Operation number: 46630-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Note! Removal steps in this procedure may contain installation details.

Remove the wheel. Service and Repair.

Remove the wheel spindle from the link arm. Service and Repair




Torque: Driveshaft to wheel hub (front)
Stage 1: 35 Nm
Stage 2: 90 degree




999 7251 Press tool 999 7251 Press Tool
951 2923 Hydraulic hole cylinder 951 2923 Hydraulic Hole Cylinder






999 7160 Key 999 7160 Key





Caution! Do not damage the drive shaft seal when removing the drive shaft from the gearbox.

Installation

To install, reverse the removal procedure