Air Bag, Front Seat

Air bag, front seat

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting. Battery Disconnecting





Follow instruction for handling of non-deployed pyrotechnical part Refer to: Handling non-deployed pyrotechnical part Handling Non-Deployed Pyrotechnical Part

Follow instructions about safety information pyrotechnical system Refer to: Safety information pyrotechnical systems Service Precautions

Follow the instructions about positioning safety components. Refer to: Positioning safety labels

Remove the upholstery Refer to: Front seat backrest Front Seat Backrest








Torque: M6, 10 Nm




Torque: Air bag to seat (SIPS), 7 Nm

Perform connector ignition cable. Igniter Wire Connector





Installation

To install, reverse the removal procedure.

Perform supplemental restraint system (SRS), post check Refer to: Supplementary restraint system (SRS), inspection Testing and Inspection