Rear Door Window Motor: Service and Repair

Electric motor, lift mechanism, rear door

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the electric motor for the power window mechanism

Caution! The control module and the electric motor may not be parted.





Remove:
- the door panel. Panel Rear Door
- the 1 connector
- the 3 screws
- the lift mechanism motor.

Installation

Note! For tightening torques, see Specifications. [1][2]Specifications

Installing the electric motor for the power window

Install:
- the lift mechanism motor
- the 3 M6 screws. Tighten
- the 1 connector
- the door panel. Panel Rear Door
Initialize the window lift mechanism.