Drive Shaft Right

Drive shaft right

Operation number: 46632-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Note! Removal steps in this procedure may contain installation details.

Remove the wheel. Refer to: Wheels Service and Repair.

Remove the wheel spindle from the link arm.




Torque: Driveshaft to wheel hub (front) Stage 1: 35 Nm Stage 2: 90 degree




999 7251 Press tool 999 7251 Press Tool
951 2923 Hydraulic hole cylinder 951 2923 Hydraulic Hole Cylinder








Torque: M8, 24 Nm





Caution! Caution! Do not damage the drive shaft seal when removing the drive shaft from the gearbox.

Installation

To install, reverse the removal procedure