Gear Selector Knob, Replacing

Gear selector knob, replacing

Removal

Removing the gear selector knob




Insert two weatherstrip tools between the locking sleeve and the gear selector lever knob to detach the locking sleeve.





Remove the gear selector knob as follows:
Stand astride the center console. Grasp the gear selector lever knob using both hands. Pull it straight upwards with a hard jerk.

Installation

Installing the gear selector knob





Note! The gear selector knob may be reused a maximum of four times

Press the gear selector knob so that it locks in the lever.
If necessary: Use a sheet metal hammer and a shim to carefully hit the knob down on to the gear selector lever.

Check
Check that the lock function operates in its positions.

Installing the lock bracket on the gear selector knob
Install the lock bracket. See Gear selector knob, Geartronic, replacing Gear Selector Knob, Geartronic, Replacing.