Seat Latch Cable: Service and Repair

Cable for the opening mechanism

Removing the cable




- Remove the opening handle according to Backrest handle Backrest Handle
- Remove the upholstery according to Upholstery and backrest cushion, auxiliary rear facing seat, replacing
- Press the catches together. Pull out the cable mounting
- Disconnect the mechanical cable from the wedge.

Installing the mechanical cable
- Secure the mechanical cable in the wedge and press in the cable mounting
- Install the upholstery according to Upholstery and backrest cushion, auxiliary rear facing seat, replacing
- Install the opening handle according to Backrest handle Backrest Handle.

Note! The lock tab must be behind the guide lug.