Ashtray, Rear

Ashtray, rear










Ashtray, rear




- Remove the panel from the rear edge of the centre console. Carefully pry off the panel using a plastic weatherstrip tool. The panel will not be reused.




- Remove the holder for the panel. Pry the securing hooks downwards at the upper edge on both sides. Use a small screwdriver. Pull out the holder at the upper edge.




- Disconnect the grey connectors from the holder. Carefully angle the connectors out slightly at the upper edge until they release from the catches on the holder. Slide the connectors towards the upper edge of the holder until they release
- Pull off the black connector
- Place the holder for the panel to one side. It will not be reused.




- Press the ashtray and the connectors on the reverse
- Hook the ashtray onto the lower edge of the centre console. Fold the ashtray up. Press into place at the upper edge.