Wiper Arm: Service and Repair

Wiper arm

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Check that the wiper motor is in the parked position. Switch on the ignition. Switch the wipers on and off.
Ignition off.
Remove the key.

Removal

Removing wiper arm





Remove:
- the protective cover
- 1 nut.

Hint: Fold up the wiper arm. User the wiper arm as a lever. Pry it carefully back and forth until it releases

Installation

Installing the wiper arm





Install:
- the wiper arm
- the nut. Adjust the wiper arm to the correct position. See the illustration. X=10 mm.

Tighten, see: Tightening torque [1][2]Specifications.

- the wiper blade.