Inflatable Curtain

Inflatable curtain

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the inflatable curtain





Remove:
- the door panel. See: Panel front door Panel Front Door
- 13 cover panel screws
Bend up the panel and pull it straight out from the door panel.

Remove:
- the igniter cable
- the screw of the gas generator.

Installation

Installing the inflatable curtain

Note! For tightening torques, see Specifications. [1][2]Body and Frame.

Install:
- the screw of the gas generator and tighten
- the 13 cover panel screws; tighten
- the igniter cable
- the door panel as described in Panel front door Panel Front Door.