Phone Module (PHM)

Phone Module (PHM)

Operation number: 39405-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.





Removal

Remove the glove compartment Refer to: Glove compartment Glove Compartment

Removing the phone module (PHM)





Remove:
- the 2 screws
- the control module. Unhook the front edge of the control module and fold down
- the 4 connectors

Installation

Installing the phone module (PHM)

Note! Check that there is no dirt in the optical connectors.

Connect the connectors.

Note! The bend radius of the optic cables must not be less than 25mm.

Install:
- the 4 connectors
- the control module
- the 2 screws

Installing the glove compartment
Install the glove compartment. Refer to: Glove compartment Glove Compartment

Finishing

Note! After replacing the phone module (PHM), new software must be ordered and the module programmed.

Ordering software
Order software for the control module. See: Programming and Relearning






Vehicles with Volvo On Call