Center Mounted Brake Lamp: Service and Repair

High mounted stop lamp

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Setting of roof




The roof shall be in the lowered position.

Removal

Removing the brake light





Remove:
- the nuts, 3 pcs.
- the connector
- the brake light.

Installation

Installing brake light

Install:
- the nuts, 3 pcs. Tighten. [1][2]Specifications
- the connector
- the brake light.

Finishing

Function test
Perform function test.