Engine Support Insulator, Right

Engine support insulator, right

Special tools:
999 7103 Lifting beam 999 7103 Lifting Beam
999 5185 HOOK 999 5185 Hook

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work




Install lifting beam: 999 7103 Lifting beam 999 7103 Lifting Beam together with hook: 999 5185 HOOK 999 5185 Hook. Tension the tool. Lift the expansion tank and place on the engine.

Note! Ensure that no coolant escapes.

Marking the position of the engine pad




Mark the position of the engine pad on the frame member. Use a marker pen.

Removal

Removing the engine cover





Remove:
- the 2 screws (1)
- the limiter
- the 2 screws (2)
- the engine pad.

Installation

Installing the engine pad

Note! For tightening torques, see Specifications. Tightening Torque.





Install:
- the engine pad according to the markings
- the screws (2). See: Tightening torque, B5254T7 Tightening Torque
- the limiter
- the screws (1). See: Tightening torque, B5254T7 Tightening Torque

Finishing

Remove lifting beam: 999 7103 Lifting beam 999 7103 Lifting Beam and hook: 999 5185 HOOK 999 5185 Hook.
Install the expansion tank.