Hinge Headliner Middle

Hinge headliner middle

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal





Remove:
- the headlining as described in Convertible Top Center Headliner Convertible Top Center Headliner
- the 2 M6 nuts
- the clip on the right side.




Remove the 2 M6 nuts.




Remove the 3 M6 nuts.

Installation

Note! For tightening torques, see Specifications. [1][2]Body and Frame.

Install in the reverse order.