Headliner Cord

Headliner Cord

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Supplementary information
The existing ceiling string cannot be used on all cars. On older cars a hole must be drilled in a link in the mechanical coupling.








A = 130 mm
Hole diameter = 4.3 mm

Use: Pop rivet, 948338

















Removal

Removal of headlining wire




Unhook the wire attachments, 3 off, from the headlining, 1 per wire.




















Unhook the wire attachment.

Hint: Use pliers.












Remove the rear wire attachment.
Press together the headlining and wire attachment.





Hint: Use a small flat screwdriver.





Installation

Install in the reverse order.