Cover/Armrest Tunnel Compartment

Cover/armrest tunnel compartment

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the cover / armrest





Remove:
- the rear cigarette lighter socket. See: Extra power socket 12V Extra Power Socket 12V
- the 4 screws.

Transferring components

Separating the cover / armrest




Remove the 6 screws.




Separate the cover / armrest by releasing the frame (1).





Note! Note the position of the spring.





Note! Note the position of the armrest hinge.

Installation

Installing the cover / armrest

Install:
- the 4 screws. Tighten
- the rear cigarette lighter socket. See: Extra power socket 12V Extra Power Socket 12V.