Center Mounted Brake Lamp: Service and Repair

High level stop lamp, replacing

Removal and Installation

Removing the stop (brake) lamp

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.





Note! The stop lamp can only be replaced as a complete unit.

Remove:
- the blind cover plugs using a small screwdriver
- the screws. Disconnect the connector
- the washer hose
- the stop (brake) lamp
- the washer nozzle.

Installing the stop lamp

Install:
- the washer nozzle
- the washer hose.
Connect the connector.
Align the stop lamp.

Install:
- 2 screws
- blind cover plugs.
Test the function.