Exhaust System: Service and Repair

Exhaust system, replacing

Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.





Removing the exhaust system
- Raise the car
- Remove the old exhaust pipe. Begin from the front.

Installing the exhaust system

Note: To ensure that there is no exhaust leakage, see: Flanged joint, assembling.

Note: The new exhaust system is supplied in two sections.





Install:
- the front section of the exhaust system. Use a new flange gasket. Do not tighten
- the rear section with the pipe clamp
- the mountings for the exhaust system.

Adjust the position of the exhaust system and tighten:
- the screws and the nuts for the flange gasket
- the pipe clamp.