Power Steering Fluid Reservoir: Service and Repair

Fluid reservoir, reservoir

Removing the fluid reservoir




- Install lock grip pliers on the return hose from the fluid reservoir as close to the power steering pump as possible.

Note! Place paper over the generator (GEN) as protection against oil.

- Remove the return hose from the power steering pump.




- Lift the fluid reservoir from the mounting. Remove the lock grip pliers. Drain the oil into a container.

Warning! Avoid skin contact with the oil.

- Disconnect both the hoses from the reservoir
- Remove the reservoir.

Installing fluid reservoir
- Install the reservoir in reverse order
- Remove the paper over the generator (GEN)
- Top up with oil. For the correct oil quality, see specifications.