Headlamp Washer Spray Nozzle: Service and Repair

Nozzle high-pressure washer headlamp, replacing

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the nozzle





Caution! Do not scratch the bumper.

Pull the cover straight out.
Remove the clip.
Carefully drop the arm back for the nozzle.

Removing the cover





Remove:
- the cover from the nozzle. Press in the cover and bend out the mounting arms
- the 1 clip.

Installation

Installing the cover

Install:
- the 1 clip
- the spring
- the cover on the nozzle.

Installing the nozzle





Caution! Do not scratch the bumper.

Pull out the washer using pliers.
Align the nozzle. Press the nozzle into the lock.
Carefully drop the arm back for the nozzle.

Finishing

Function test
Test the function.