Procedures

Connectors, transmission, disconnecting / connecting

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information is always correct.

Disassembly




A. Transmission input and output speed sensors.
B. Gear-shift position sensor.
D. Oil temperature sensor solenoids: SLU, SLT and SLS.
C. Solenoids S1 - S5.
Unhook the mounting with the connectors for the transmission from the bracket for the air cleaner (ACL) housing.
Separate the connectors.

Reassembly
Connect the connectors. Ensure that the catches for the connectors are in their positions
Install the mounting on the bracket for the air cleaner (ACL) housing.