Exhaust System: Service and Repair

Exhaust System, Replacing

NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing the exhaust system







- Raise the car
- Remove the old exhaust pipe. Begin from the front.

Installing the exhaust system

NOTE:
- Ensure that there is no exhaust leakage
- The new exhaust system is supplied in two sections.

Install:







- the front section of the exhaust system. Use a new flange gasket. Do not tighten
- the rear section with the pipe clamp
- the mountings for the exhaust system.

Adjust the position of the exhaust system and tighten:
- the screws and the nuts for the flange gasket
- the pipe clamp.