Wiper Motor Linkage: Service and Repair

Wiper mechanism, windshield

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off
Check that the wiper motor is in the parked position. Switch on the ignition. Switch the wipers on and off.




Ignition off.
Remove the key.

Removal

Removing the wiper mechanism





Remove:
- the cowl. See: Plenum chamber Service and Repair
- the 1 connector
- the 4 M6 screws
- the wiper mechanism.

Installation

Note! For tightening torques, see: Tightening torque. [1][2]Specifications

Installing the wiper mechanism

Install:
- the wiper mechanism
- the 4 M6 screws
- the 1 connector
- the cowl. See: Plenum chamber Service and Repair