Wheel Bearings and Wheel Hubs, Front

Wheel bearings and wheel hubs, front

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the wheel spindle. Service and Repair

Removal

Removing wheel bearings




Secure the wheel knuckle in a hydraulic press. Use:
socket 999 7090 Press tool 999 7090 Press Tool
drift: 999 1801 STANDARD SHAFT 999 1801 Standard Shaft
with: 999 5137 PUNCH 999 5137 Punch

Press out the bearing.

Installation

Installing wheel bearing




Position both halves of 7090-1 between the bearing and the hub.




Position the bearing together with 7090-1 on socket: 999 7090 Press tool 999 7090 Press Tool.

Position the wheel spindle and drift 7090-2. Press in the bearing.

Finishing

Install the wheel spindle. Service and Repair