Steering Wheel: Service and Repair

Steering wheel

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the driver's airbag module. Driver's Airbag

Removing the steering wheel




Secure the contact reel using the 1 screw (2).




Remove the screw for the steering wheel - steering column (2), 1 pc.
Pull the steering wheel straight back.

Installing the steering wheel

Note! For tightening torques, see Specifications. [1][2]Specifications

Install:
- the steering wheel
- the screw for the steering wheel - steering column. Use a new screw. Tighten according to: Tightening torque [1][2]Specifications.
Remove the screw that locks the contact reel. Reinstall it in the hole in the bottom right-hand side of the steering wheel.

Finishing

Install the driver's airbag module. Driver's Airbag