Turbocharger: Service and Repair

Turbocharger (TC)

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting Refer to: Battery Disconnecting

Perform cooling system draining, charging and bleeding Refer to: Service and Repair

Remove the catalytic converter Refer to: Service and Repair





Caution! Make sure that the inside of the pipe ends are clean and free of oil residue.





Caution! Make sure that the inside of the pipe ends are clean and free of oil residue.

Torque: M6, 10 Nm





Caution! Make sure that the inside of the pipe ends are clean and free of oil residue.




Torque: M6, 10 Nm





Caution! Make sure that the inside of the pipe ends are clean and free of oil residue.





Caution! Make sure that the inside of the pipe ends are clean and free of oil residue.




Torque: M8, 24 Nm




Torque: Coolant pipe to turbocharger, 38 Nm








1. Torque: Oil pressure pipe to the turbocharger, 26 Nm

2. Torque: Crankcase connection-turbocharger, 25 Nm




Torque: M6, 10 Nm




Torque: M8, 24 Nm





Installation

To install, reverse the removal procedure.