Sill Edge

Sill edge

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the sill molding




Undo the rear edge of the front sill molding.

Remove:
- the rear sill molding with 4 clips and 1 M6 screw
- the front sill molding with 5 clips.

Installation

Note! For tightening torques, see Specifications. [1][2]Body and Frame.

Installing the sill molding
Install in the reverse order.