Blower Fan Motor Rear, Replacing

Blower fan motor rear, replacing

As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparations
Remove the rear left side panel. See Side panel cargo compartment, replacement Side Panel Cargo Compartment, Replacement.

Removing the rear blower fan motor




Remove the rubber seals and the cable terminals.
Remove the 3 screws for the blower fan motor (A).

Installing the rear blower fan motor

Note! For tightening torques, see Specifications [1][2]Body and Frame.

Install:
- the blower fan motor using the 3 M5 screws. Tighten
- the cable terminals and the rubber seals.
Check the function.
Install the rear left side panel. See Side panel cargo compartment, replacement Side Panel Cargo Compartment, Replacement.