Sun Visor: Service and Repair

Sun visor, replacing

As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing the sun visor





Remove:
- the panel (2)
- the 2 screws (3).
Turn the sun visor towards the side window.
Press the catches at the mounting outwards.
Pull the sun visor straight downwards.
Disconnect and disassemble the connector.

Removing the snap fastener
Open the cover.
Press in the catch.
Fold the mounting downwards.
Pull the mounting (1) back into the car at an angle.

Installing the sun visor

Install:
- the connector
- the mounting for the sun visor
- the 2 M6 screws. Tighten
- the cover.

Installing the snap fastener
Install the snap fastener.
Close the cover.