Seat Belt Buckle (Second Generation Power Seats)

Seat belt buckle

Removing the seat belt buckle




Remove the seat from the car. See Removing power seats, tilting Removal and Replacement.
Disconnect the connector. See Multi-connector Multi-Connector.
Detach the wiring from the steel clips.

Note! Check that the wiring is correctly routed.

Remove:
- one screw
- the seat belt buckle.

Installing the seat belt buckle

Install:
- the seat belt buckle
- one screw
- the wiring using the steel clip
- the connector. See Multi-connector Multi-Connector
- the seat. See Removing power seats, tilting Removal and Replacement.

Note! Check that the wiring is routed the same as the original wiring. Otherwise there is a risk of damage to the wiring.