Cable Harness Volvo On Call, Repair

Cable harness Volvo on Call, repair

The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Exposing the cable harness

Remove the center console. Center Console, Replacing

Remove:
- the radio.
- the phone module.
Unplug the connector at the SRS control module.

Repairing the cable harness

Note! If an airbag(s) has deployed, the cable harness must be checked.

Note! If an airbag(s) has deployed, the status of the reserve battery must be checked.





The following pins are for Volvo On Call:
Connector at SRS control module: Pin B28 (yellow/white cable).
Connector at keypad: Pin 17 (yellow/white cable).




Repair the cable harness.

Note! The cable between the phone module (PHM) and SRS module (yellow/white) is joined in the cable harness and is routed to the central electronic module.