Side Panel Loadspace

Side panel loadspace

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the side panel in the cargo compartment





Remove:
- the outer load floor.




Remove the 2 plastic screws for the sill trim panel in the cargo compartment. Remove the sill trim panel by pulling it straight upwards so that the 2 clips release.

Remove:
- the molding at the side panel.




- the 4 clips in the cargo compartment.




Fold down the rear seat backrest cushion.

Remove:
- the 1 clip in the passenger compartment
- the 1 clip for the parcel shelf.
Detach the side panel at the parcel shelf. Remove the side panel.

Installation

Installing the side panel in the cargo compartment

Install:
- the side panel
- the 1 clip for the parcel shelf
- the 1 clip in the passenger compartment
- the 4 clips in the cargo compartment.
Press the sill trim panel into place. Install the 2 plastic screws.

Install:
- the weatherstrip
- the outer load floor.