Panel A-Post, Replacing

Panel A-post, replacing

As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing the A-post panel





Remove:
- the door weather strip
- the 2 covers and handles
- the 2 screws.
Pull the panel inwards into the car.
Lift the panel upwards.

Installing the A-post panel




Insert the A-post panel at the bottom edge.
Press the A-post panel into place.

Install:
- the 2 M5 screws. Tighten
- the 2 covers and the handles.