9 - Verification

Verification







HINT: Once a fault has been repaired, conduct a verification to check that the fault has disappeared.

- Reinstall the connectors, components, etc.
- Ignition on
- Erase diagnostic trouble codes by clicking the VCT2OOO symbol
- Start the car. Allow the car to run for 10 minutes
- Read off diagnostic trouble codes (DTCs).

Does the diagnostic trouble code (DTC) for a communication fault recur (CEM-1A5X or CEM-1A6X)?

Does the diagnostic trouble code (DTC) recur?

YES: Continue with Test (See Fault-Tracing Information Permanent Fault). 10 - Fault-Tracing Information - Permanent
NO: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions