Fluid - M/T: Service and Repair

Transmission fluid, replacing

Removing splash guards and front wheels




Raise the vehicle.

Remove:
- the splash guard under the engine
- the left front wheel.

Draining the transmission fluid
Collect the oil in a container.
Remove the drain plug. Drain the oil.
Install the plug with a new gasket. Tighten to 35 Nm.

Checking the oil level




Remove the level plug and fill with oil. Use only Volvo transmission oil P/N 116 1745 (1 liter). Volume in the transmission 2.1 liters.
Install the level plug with a new gasket. Tighten to 35 Nm.

Installing splash guards and front wheels

Install:
- the splash guard under the engine. Tighten the screws. Tighten to 25 Nm
- the wheel. See Installing wheels Service and Repair.